After a power outage, we discovered that we lost internet connection to one of the best home use router, ubiquti edgerouter. This model was POE 5. Decided to bring a ER-5 but I had a console with me and I want to see what is going on behind.
Octeon ubnt_e100#
Looking for valid bootloader image....
Jumping to start of image at address 0xbfc80000
U-Boot 1.1.1 (UBNT Build Version: e101_003_eace7) (May 27 2019 - 06:35:00)
BIST check passed.
UBNT_E100 r1:1, r2:27, f:8/135, serial #: 802AA88E327D
MPR 13-00290-27
Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM: 512 MB
Clearing DRAM....... done
ERROR: Unable to allocate linux reserved memory (addr: 0x100000, size: 0x8000000).
Flash: 8 MB
Net: octeth0, octeth1, octeth2
USB: (port 0) scanning bus for devices... 1 USB Devices found
scanning bus for storage devices...
Device 0: Vendor: Prod.: USB DISK 2.0 Rev: PMAP
Type: Removable Hard Disk
Capacity: 3824.0 MB = 3.7 GB (7831552 x 512)
leds_init 206 0
reading vmlinux.64
.................................
6711256 bytes read
reading vmlinux.64.md5
md5 checksum error.Looks like there is actually a flashdrive from where the device is booting and…the files are corrupted.
Because I didn’t had any usb flash drive, small enough for that USB, I tried to re-install the img file directly using windows a app that is capable to do that. App is called ImageUSB and the be found here. or here.
Mounted the USB back, restore the configuration from archive, everything works as before. Not sure for how long.
Here is the log after flasing.
Looking for valid bootloader image....
Jumping to start of image at address 0xbfc80000
U-Boot 1.1.1 (UBNT Build Version: e101_003_eace7) (May 27 2019 - 06:35:00)
BIST check passed.
UBNT_E100 r1:1, r2:27, f:8/135, serial #: 802AA88E327D
MPR 13-00290-27
Core clock: 500 MHz, DDR clock: 266 MHz (532 Mhz data rate)
DRAM: 512 MB
Clearing DRAM....... done
ERROR: Unable to allocate linux reserved memory (addr: 0x100000, size: 0x8000000).
Flash: 8 MB
Net: octeth0, octeth1, octeth2
USB: (port 0) scanning bus for devices... 1 USB Devices found
scanning bus for storage devices...
Device 0: Vendor: Prod.: USB DISK 2.0 Rev: PMAP
Type: Removable Hard Disk
Capacity: 3824.0 MB = 3.7 GB (7831552 x 512)
leds_init 206 0
reading vmlinux.64
..................................
6882440 bytes read
reading vmlinux.64.md5
argv[2]: coremask=0x3
argv[3]: root=/dev/sda2
argv[4]: rootdelay=15
argv[5]: rw
argv[6]: rootsqimg=squashfs.img
argv[7]: rootsqwdir=w
argv[8]: mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@1024k(eeprom)
ELF file is 64 bit
Allocating memory for mapped kernel segment, alignment: 0x400000
Allocated memory for ELF segment: addr: 0x400000, size 0x7de180
Processing PHDR 0
Loading 68ee80 bytes at 8000000000400000
Clearing 14f300 bytes at a8ee80
## Loading Linux kernel with entry point: 0x80000000008ec0c0 ...
Bootloader: Done loading app on coremask: 0x3
Linux version 3.10.20-UBNT (root@ubnt-builder2) (gcc version 4.7.0 (Cavium Inc. Version: SDK_3_1_0_p2 build 34) ) #1 SMP Fri Jul 29 16:51:50 PDT 2016
CVMSEG size: 2 cache lines (256 bytes)
Cavium Inc. SDK-3.1
bootconsole [early0] enabled
CPU revision is: 000d0601 (Cavium Octeon+)
Checking for the multiply/shift bug... no.
Checking for the daddiu bug... no.
Determined physical RAM map:
memory: 000000000f000000 @ 0000000000c00000 (usable)
memory: 000000000fc00000 @ 0000000410000000 (usable)
memory: 000000000064c000 @ 0000000000400000 (usable)
memory: 0000000000044000 @ 0000000000a4c000 (usable after init)
Wasting 57344 bytes for tracking 1024 unused pages
software IO TLB [mem 0x01707000-0x01747000] (0MB) mapped at [8000000001707000-8000000001746fff]
Zone ranges:
DMA32 [mem 0x00400000-0xefffffff]
Normal [mem 0xf0000000-0x41fbfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00400000-0x00a8ffff]
node 0: [mem 0x00c00000-0x0fbfffff]
node 0: [mem 0x410000000-0x41fbfffff]
Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
Secondary unified cache 128kB, 8-way, 128 sets, linesize 128 bytes.
PERCPU: Embedded 10 pages/cpu @8000000001784000 s11904 r8192 d20864 u40960
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125887
Kernel command line: bootoctlinux $loadaddr coremask=0x3 root=/dev/sda2 rootdelay=15 rw rootsqimg=squashfs.img rootsqwdir=w mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@1024k(eeprom) console=ttyS0,115200
PID hash table entries: 2048 (order: 2, 16384 bytes)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Memory: 495244k/510528k available (5090k kernel code, 15284k reserved, 1354k data, 272k init, 0k highmem)
Hierarchical RCU implementation.
Additional per-CPU info printed with stalls.
NR_IRQS:255
Calibrating delay loop (skipped) preset value.. 1000.00 BogoMIPS (lpj=5000000)
pid_max: default: 32768 minimum: 501
Security Framework initialized
Mount-cache hash table entries: 256
Checking for the daddi bug... no.
SMP: Booting CPU01 (CoreId 1)...
CPU revision is: 000d0601 (Cavium Octeon+)
Brought up 2 CPUs
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource OCTEON_CVMCOUNT
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP: reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
octeon_pci_console: Console not created.
/proc/octeon_perf: Octeon performance counter interface loaded
HugeTLB registered 2 MB page size, pre-allocated 0 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering unionfs 2.5.13 (for 3.10.34)
msgmni has been set to 967
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 34) is a OCTEON
console [ttyS0] enabled, bootconsole disabled
console [ttyS0] enabled, bootconsole disabled
1180000000c00.serial: ttyS1 at MMIO 0x1180000000c00 (irq = 35) is a OCTEON
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
OcteonUSB 16f0010000000.usbc: Octeon Host Controller
OcteonUSB 16f0010000000.usbc: new USB bus registered, assigned bus number 1
OcteonUSB 16f0010000000.usbc: irq 56, io mem 0x00000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
OcteonUSB: Registered HCD for port 0 on irq 56
usbcore: registered new interface driver usb-storage
octeon_wdt: Initial granularity 5 Sec
TCP: cubic registered
NET: Registered protocol family 17
NET: Registered protocol family 15
Bootbus flash: Setting flash for 8MB flash at 0x1f400000
phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x0000c9
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.1.
phys_mapped_flash: Swapping erase regions for top-boot CFI table.
number of CFI chips: 1
3 cmdlinepart partitions found on MTD device phys_mapped_flash
Creating 3 MTD partitions on "phys_mapped_flash":
0x000000000000-0x000000080000 : "boot0"
0x000000080000-0x000000100000 : "boot1"
0x000000100000-0x000000110000 : "eeprom"
Waiting 15sec before mounting root device...
usb 1-1: new high-speed USB device number 2 using OcteonUSB
usb-storage 1-1:1.0: USB Mass Storage device detected
scsi0 : usb-storage 1-1:1.0
scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: [sda] No Caching mode page found
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
kjournald starting. Commit interval 3 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with journal data mode
VFS: Mounted root (unionfs filesystem) on device 0:11.
Freeing unused kernel memory: 272K (ffffffffc064c000 - ffffffffc0690000)
Algorithmics/MIPS FPU Emulator v1.5
INIT: version 2.88 booting
INIT: Entering runlevel: 2
[ ok ] Starting routing daemon: rib nsm ribd.
[ ok ] Starting EdgeOS router: migrate rl-system configure.
Welcome to EdgeOS ubnt ttyS0
By logging in, accessing, or using the Ubiquiti product, you
acknowledge that you have read and understood the Ubiquiti
License Agreement (available in the Web UI at, by default,
http://192.168.1.1) and agree to be bound by its terms.
ubnt login: ubnt
Password:
Linux ubnt 3.10.20-UBNT #1 SMP Fri Jul 29 16:51:50 PDT 2016 mips64
Welcome to EdgeOS
